Skip Navigation



Annals of Occupational Hygiene Advance Access published online on August 4, 2008

Annals of Occupational Hygiene, doi:10.1093/annhyg/men048
This Article
Right arrow Full Text Freely available
Right arrow FREE Full Text (PDF) Freely available
Right arrow All Versions of this Article:
52/7/607    most recent
men048v1
Right arrow Alert me when this article is cited
Right arrow Alert me if a correction is posted
Services
Right arrow Email this article to a friend
Right arrow Similar articles in this journal
Right arrow Similar articles in PubMed
Right arrow Alert me to new issues of the journal
Right arrow Add to My Personal Archive
Right arrow Download to citation manager
Right arrowRequest Permissions
Google Scholar
Right arrow Articles by Suuronen, K.
Right arrow Articles by Tuomi, T.
Right arrow Search for Related Content
PubMed
Right arrow PubMed Citation
Right arrow Articles by Suuronen, K.
Right arrow Articles by Tuomi, T.
Social Bookmarking
 Add to CiteULike   Add to Connotea   Add to Del.icio.us  
What's this?

© The Author 2008. Published by Oxford University Press on behalf of the British Occupational Hygiene Society

Respiratory Exposure to Components of Water-Miscible Metalworking Fluids

Katri Suuronen1,*, Maj-Len Henriks-Eckerman2, Riitta Riala3 and Timo Tuomi1

1 Department of Occupational Medicine, Finnish Institute of Occupational Health, Topeliuksenkatu 41 a A, 00250 Helsinki, Finland
2 Chemical Agents, Finnish Institute of Occupational Health, Lemminkäisenkatu 14-18 B, 20520 Turku, Finland
3 Chemical Agents, Finnish Institute of Occupational Health, Topeliuksenkatu 41 a A, 00250 Helsinki, Finland

* Author to whom correspondence should be addressed. Tel: +358-30-474-2576; fax: +358-9-5875-449; e-mail: katri.suuronen{at}ttl.fi

Water-miscible metalworking fluids (MWFs) are capable of causing respiratory symptoms and diseases. Recently, much emphasis has been put on developing new methods for assessing respiratory exposure to MWF emulsions. The air concentrations of ingredients and contaminants of MWF and inhalable dust were measured in 10 metal workshops in southern Finland. Oil mist was determined by infra red spectroscopy analysis after tetrachloroethylene extraction from the filter. Aldehydes were collected on Sep-Pak chemosorbents and analysed by liquid chromatography. Volatile organic compounds (VOCs) were collected on Tenax adsorbents and analysed by gas chromatography with mass spectrometric detection after thermal desorption. Endotoxins were collected on glass fibre filter and analysed by enzyme-based spectrophotometry, and viable microbes were collected on polycarbonate filter and cultured. Inhalable dust was collected on cellulose acetate filter and quantified gravimetrically. Associations between the different exposures were calculated with Spearman’s correlations. The mean concentration of oil mist was 0.14 (range <0.010–0.60) mg m–3. The mean total concentration of aldehydes was 0.095 (0.026–0.38) mg m–3, with formaldehyde as the main aldehyde. The average total concentration of VOC was 1.9 (0.34–4.5) mg m–3 consisting mainly of high-boiling aliphatic hydrocarbons. Several potential sensitizing chemicals such as terpenes were found in small quantities. The concentration of microbial contaminants was low. All the measured air concentrations were below the Finnish occupational exposure limits. The exposure in machine shops was quantitatively dominated by volatile compounds. Additional measurements of MWF components such as aldehydes, alkanolamines and VOCs are needed to get more information on the chemical composition of workshops’ air. New air cleaning methods should be introduced, as oil mist separators are insufficient to clean the air of small molecular impurities.

asthma • exposure • formaldehyde • metalworking fluid • volatile organic compounds

Received March 27, 2008; in final form June 26, 2008


Add to CiteULike CiteULike   Add to Connotea Connotea   Add to Del.icio.us Del.icio.us    What's this?




Disclaimer: Please note that abstracts for content published before 1996 were created through digital scanning and may therefore not exactly replicate the text of the original print issues. All efforts have been made to ensure accuracy, but the Publisher will not be held responsible for any remaining inaccuracies. If you require any further clarification, please contact our Customer Services Department.