Skip Navigation



Annals of Occupational Hygiene Advance Access published online on July 27, 2004

Annals of Occupational Hygiene, doi:10.1093/annhyg/meh045
Copyright © 2004 by the British Occupational Hygiene Society.
This Article
Right arrow FREE Full Text (PDF) Freely available
Right arrow All Versions of this Article:
48/7/643    most recent
meh045v1
Right arrow Alert me when this article is cited
Right arrow Alert me if a correction is posted
Services
Right arrow Email this article to a friend
Right arrow Similar articles in this journal
Right arrow Similar articles in PubMed
Right arrow Alert me to new issues of the journal
Right arrow Add to My Personal Archive
Right arrow Download to citation manager
Right arrowRequest Permissions
Google Scholar
Right arrow Articles by Preller, L.
Right arrow Articles by Kromhout, H.
Right arrow Search for Related Content
PubMed
Right arrow PubMed Citation
Right arrow Articles by Preller, L.
Right arrow Articles by Kromhout, H.
Social Bookmarking
 Add to CiteULike   Add to Connotea   Add to Del.icio.us  
What's this?

Received July 4, 2003
Accepted January 22, 2004

Article

Characteristics of Peaks of Inhalation Exposure to Organic Solvents

Liesbeth Preller 1*, Igor Burstyn 2, Nettie de Pater 1, Hans Kromhout 3

1 Department of Food and Chemical Risk Analysis, Netherlands Organisation for Applied Scientific Research (TNO Chemistry), Zeist, The Netherlands
2 Division of Environmental and Occupational Health, Institute for Risk Assessment Sciences, Utrecht University, Utrecht, The Netherlands; Department of Public Health Sciences, Faculty of Medicine and Dentistry, University of Alberta, Edmonton, Canada
3 Division of Environmental and Occupational Health, Institute for Risk Assessment Sciences, Utrecht University, Utrecht, The Netherlands

* To whom correspondence should be addressed. E-mail: preller{at}chemie.tno.nl.


   Abstract

Objectives: To determine which exposure metrics are sufficient to characterize ‘peak’ inhalation exposure to organic solvents (OS) during spraying operations.

Methods: Personal exposure measurements (n = 27; duration 5-159 min) were collected during application of paints, primers, resins and glues in 15 companies. A MiniRAE Photo-Ionization Detector measured OS concentrations every second. These readings were adjusted for OS composition, which was determined by charcoal tubes. A peak was defined as a period during which exposure exceeded the time-weighted average (TWA) exposure. Five second and 1 and 15 min moving average times were considered in defining a peak. The number of peaks per hour, the duration of a peak, the maximum concentration within a peak, the average concentration within a peak, the ratio between maximum and average concentration within a peak and the average time between two peaks were recorded for each sample. Data were analyzed using factor analysis on 13 variables for the 27 samples: TWA concentration of the task and the six peak characteristics based on the 5 s and 1 min moving averaging time.

Results: There were three statistically independent sources of correlation among metrics of peak exposure, explaining 87% of the multiple correlation. The first factor reflected the intensity of peak exposure; it was also associated with the TWA. The second and third factors were related to measures of variability (in frequency and intensity) and duration of peaks, respectively.

Conclusions: We present a method for describing peak profiles for inhalation exposure in terms of various distinguishable and independent parameters. Pending development of toxicologically justified peak exposure metrics, such investigations can be of value in identifying exposure metrics for which non-confounded risk estimates can be obtained in epidemiological studies.


Add to CiteULike CiteULike   Add to Connotea Connotea   Add to Del.icio.us Del.icio.us    What's this?


This article has been cited by other articles:


Home page
ANN OCCUP HYGHome page
T. Meijster, E. Tielemans, J. Schinkel, and D. Heederik
Evaluation of Peak Exposures in the Dutch Flour Processing Industry: Implications for Intervention Strategies
Ann. Hyg., October 1, 2008; 52(7): 587 - 596.
[Abstract] [Full Text] [PDF]


Home page
ANN OCCUP HYGHome page
J. G. M. Van Rooij, A. Kasper, G. Triebig, P. Werner, F. J. Jongeneelen, and H. Kromhout
Trends in Occupational Exposure to Styrene in the European Glass Fibre-Reinforced Plastics Industry
Ann. Hyg., July 1, 2008; 52(5): 337 - 349.
[Abstract] [Full Text] [PDF]


Home page
ANN OCCUP HYGHome page
E. Langlois
GABIE and Perkin Elmer Passive Sampler Performance under Fluctuating Concentration Conditions
Ann. Hyg., June 1, 2008; 52(4): 239 - 247.
[Abstract] [Full Text] [PDF]


Home page
Occup. Environ. Med.Home page
D. Kriebel, H. Checkoway, and N. Pearce
Exposure and dose modelling in occupational epidemiology
Occup. Environ. Med., July 1, 2007; 64(7): 492 - 498.
[Abstract] [Full Text] [PDF]


Home page
ANN OCCUP HYGHome page
J. FEVOTTE, B. CHARBOTEL, P. MULLER-BEAUTE, J.-L. MARTIN, M. HOURS, and A. BERGERET
Case-Control Study on Renal Cell Cancer and Occupational Exposure to Trichloroethylene. Part I: Exposure Assessment
Ann. Hyg., November 1, 2006; 50(8): 765 - 775.
[Abstract] [Full Text] [PDF]


Home page
ANN OCCUP HYGHome page
P. WALTON
Measurement of Methylene Chloride
Ann. Hyg., April 1, 2005; 49(3): 277 - 277.
[Full Text] [PDF]


Home page
ANN OCCUP HYGHome page
G. ROSEN, I-M. ANDERSSON, P. T. WALSH, R. D. R. CLARK, A. SAAMANEN, K. HEINONEN, H. RIIPINEN, and R. PAAKKONEN
A Review of Video Exposure Monitoring as an Occupational Hygiene Tool
Ann. Hyg., April 1, 2005; 49(3): 201 - 217.
[Abstract] [Full Text] [PDF]


Home page
ANN OCCUP HYGHome page
I. BURSTYN
Principal Component Analysis is a Powerful Instrument in Occupational Hygiene Inquiries
Ann. Hyg., November 1, 2004; 48(8): 655 - 661.
[Abstract] [Full Text] [PDF]



Disclaimer: Please note that abstracts for content published before 1996 were created through digital scanning and may therefore not exactly replicate the text of the original print issues. All efforts have been made to ensure accuracy, but the Publisher will not be held responsible for any remaining inaccuracies. If you require any further clarification, please contact our Customer Services Department.