Skip Navigation


Annals of Occupational Hygiene Advance Access originally published online on December 6, 2007
Annals of Occupational Hygiene 2008 52(1):35-44; doi:10.1093/annhyg/mem060
This Article
Right arrow Full Text Freely available
Right arrow FREE Full Text (PDF) Freely available
Right arrow All Versions of this Article:
52/1/35    most recent
mem060v1
Right arrow Alert me when this article is cited
Right arrow Alert me if a correction is posted
Services
Right arrow Email this article to a friend
Right arrow Similar articles in this journal
Right arrow Similar articles in PubMed
Right arrow Alert me to new issues of the journal
Right arrow Add to My Personal Archive
Right arrow Download to citation manager
Right arrowRequest Permissions
Google Scholar
Right arrow Articles by Kim, T.
Right arrow Articles by Seo, J.
Right arrow Search for Related Content
PubMed
Right arrow PubMed Citation
Right arrow Articles by Kim, T.
Right arrow Articles by Seo, J.
Social Bookmarking
 Add to CiteULike   Add to Connotea   Add to Del.icio.us  
What's this?


© The Author 2007. Published by Oxford University Press on behalf of the British Occupational Hygiene Society

Characteristics of Rain Penetration Through a Gravity Ventilator Used for Natural Ventilation

Taehyeung Kim1,*, Dong Ho Lee2, Kwangseog Ahn3, Hyunchul Ha4, Heechang Park5, Cheng Xu Piao1, Xiaoyu Li1 and Jeoungyoon Seo1

1 Department of Environmental Engineering, Changwon National University, Kyeungsangnam-Do, 641-773, Korea
2 Gyeongsangnam-do Institute of Health and Environment, Kyeungsangnam-Do, 641-824, Korea
3 Toxics Use Reduction Institute, Department of Work Environment, University of Massachusetts Lowell, One University Avenue, Lowell, MA, USA
4 VENTECH Corp., Changwon National University, Kyeungsangnam-Do, 641-773, Korea
5 Department of Statistics, Changwon National University, Kyeungsangnam-Do, 641-773, Korea

* Author to whom correspondence should be addressed. Tel: +82-551-279-7565; fax: +82-551-281-3011; e-mail: thkim{at}sarim.changwon.ac.kr

Gravity ventilators rely simply on air buoyancy to extract air and are widely used to exhaust air contaminants and heat from workplaces using minimal energy. They are designed to maximize the exhaust flow rate, but the rain penetration sometimes causes malfunctioning. In this study, the characteristics of rain penetration through a ventilator were examined as a preliminary study to develop a ventilator with the maximum exhaust capacity while minimizing rain penetration. A model ventilator was built and exposed to artificial rain and wind. The paths, intensities and amounts of penetration through the ventilator were observed and measured in qualitative and quantitative fashions. In the first phase, the pathways and intensities of rain penetration were visually observed. In the second phase, the amounts of rain penetration were quantitatively measured under the different configurations of ventilator components that were installed based on the information obtained in the first-phase experiment. The effects of wind speed, grill direction, rain drainage width, outer wall height, neck height and leaning angle of the outer wall from the vertical position were analyzed. Wind speed significantly affected rain penetration. Under the low crosswind conditions, the rain penetration intensities were under the limit of detection. Under the high crosswind conditions, grill direction and neck height were the most significant factors in reducing rain penetration. The installation of rain drainage was also important in reducing rain penetration. The experimental results suggest that, with proper configurations of its components, a gravity ventilator can be used for natural ventilation without significant rain penetration problems.

Keywords: gravity ventilator • natural ventilation • rain penetration

Received May 30, 2007; in final form September 29, 2007


Add to CiteULike CiteULike   Add to Connotea Connotea   Add to Del.icio.us Del.icio.us    What's this?




Disclaimer: Please note that abstracts for content published before 1996 were created through digital scanning and may therefore not exactly replicate the text of the original print issues. All efforts have been made to ensure accuracy, but the Publisher will not be held responsible for any remaining inaccuracies. If you require any further clarification, please contact our Customer Services Department.