Annals of Occupational Hygiene Advance Access originally published online on October 17, 2008
Annals of Occupational Hygiene 2008 52(8):695-706; doi:10.1093/annhyg/men058
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Exposure to Manufactured Nanostructured Particles in an Industrial Pilot Plant
ETH Zurich, Institute of Environmental Engineering, Schafmattstrasse 6, 8093, Zurich, Switzerland
* Author to whom correspondence should be addressed. Tel: +41-44-63-23-172; fax: +41-44-63-31-061; e-mail: evangelia.demou{at}ifu.baug.ethz.ch
Objectives: Nanomaterial production and the number of people directly in contact with these materials are increasing. Yet, little is known on the association between exposure and corresponding risks, such as pulmonary inflammation and oxidative stress.
Methods: Condensation Particle Counters, a DustTrakTM and Scanning Mobility Particle SizerTM quantified real-time size, mass and number concentrations in a nanostructure particle pilot-scale production facility, using a high-temperature gas-phase process, over a 25-day period. Temporal and spatial analysis of particle concentrations and sizes was performed during production, maintenance and handling. Number-based particle retention of breathing mask filters used under real-time production and exposure conditions in the workplace was quantified.
Results: The results demonstrate elevated number concentrations during production, which can be an order of magnitude higher than background levels. Average concentrations during production were 59 100 cm–3 and 0.188 mg m–3 for submicron particles. Mask filters decreased particle number concentrations by >96%.
Conclusions: This study demonstrates real-time worker exposure during gas-phase nanoparticle manufacturing. Qualitative and quantitative analysis of emission sources and concentration levels in a production plant is accomplished. These results are important for workers, employers and regulators in the nanotechnology field as they provide information on encountered exposures and possibilities for mitigation measures.
Keywords: CPC • exposure • nanoparticles • particulate matter
The free full text of this article can be found in the online version of this issue.
Received February 7, 2008; in final form July 27, 2008
CiteULike 
Connotea 
Del.icio.us What's this?
This article has been cited by other articles:
|
|
 |
|
  A. Seaton, L. Tran, R. Aitken, and K. Donaldson Nanoparticles, human health hazard and regulation J R Soc Interface, February 6, 2010; 7(Suppl_1): S119 - S129. [Abstract] [Full Text] [PDF]
|
|
|
|
 |
|
 E. Demou, W. J. Stark, and S. Hellweg Particle Emission and Exposure during Nanoparticle Synthesis in Research Laboratories Ann. Hyg., November 1, 2009; 53(8): 829 - 838. [Abstract] [Full Text] [PDF]
|
|