Skip Navigation

This Article
Right arrow FREE Full Text (PDF) Freely available
Right arrow Alert me when this article is cited
Right arrow Alert me if a correction is posted
Services
Right arrow Email this article to a friend
Right arrow Similar articles in this journal
Right arrow Alert me to new issues of the journal
Right arrow Add to My Personal Archive
Right arrow Download to citation manager
Right arrowRequest Permissions
Google Scholar
Right arrow Articles by Methner, M.M.
Right arrow Articles by Bowman, J.D.
Right arrow Search for Related Content
PubMed
Right arrow Articles by Methner, M.M.
Right arrow Articles by Bowman, J.D.
Social Bookmarking
Add to CiteULike   Add to Connotea   Add to Del.icio.us  
What's this?

Ann. occup. Hyg., Vol. 44, No. 8, pp. 603-614, 2001
© 2001 British Occupational Hygiene Society
Published by Oxford University Press

Hazard surveillance for industrial magnetic fields: I. Walkthrough survey of ambient fields and sources

M.M. Methner and J.D. Bowman

National Institute for Occupational Safety and Health (Mail Stop R-19), 4676 Columbia Parkway, Cincinnati, OH 45226, USA

Tel.: +1-513-841-4325; fax: +1-513-841-4489

Received 12 April, 1999; Revised 19 January, 2000.

A walkthrough survey method was developed for measuring ambient magnetic fields (MFs) in industrial facilities as the first stage in hazard surveillance. This survey was designed to measure the mean and peak MF magnitudes at extremely low frequencies (ELFs), so that factories could be ranked by MF levels and prioritized for subsequent personal exposure monitoring. Sixty-two facilities from 13 Standard Industrial Classifications (SICs) with the highest monthly electric power usage were surveyed. To measure ambient MFs, a structured walkthrough survey with a special emphasis on workstations was conducted with an EMDEX-II meter in continuous operation, while MF sources were noted. The broadband MF data (40–800Hz) for each facility were summarized with the geometric mean (GM) and the average of the five highest readings (Hi-5). The range of the GM magnetic field magnitude was 0.04–1.61µT, where the maximum was measured at a steel mill operating large electric furnaces. Maximum values for specific sources were highly variable across and within facilities (Hi-5 range: 1.0–530µT). Chemical and Allied Products (SIC 28) and Primary Metal Products (SIC 33) had facilities with GM and Hi-5 magnetic fields greater than any of the other industrial categories. However, the SIC categories were found to be poor predictors of the ambient MF in this sample of factories. A weak relationship was found between the facility-specific monthly electric power consumption and the GM magnetic field magnitude, but confidence limits were too broad to make meaningful exposure predictions from electric power data. Overall, 89% of the GMs were at or below 0.4µT, consistent with most other studies that collected industrial MF exposure data. The walkthrough survey is a practical way of measuring ambient MFs in a large number of workplaces, and should be evaluated with personal measurements as a screening method for hazard surveillance.

EMF; extremely low frequency; ELF; EMDEX


Add to CiteULike CiteULike   Add to Connotea Connotea   Add to Del.icio.us Del.icio.us    What's this?




Disclaimer:
Please note that abstracts for content published before 1996 were created through digital scanning and may therefore not exactly replicate the text of the original print issues. All efforts have been made to ensure accuracy, but the Publisher will not be held responsible for any remaining inaccuracies. If you require any further clarification, please contact our Customer Services Department.